
NodeMobile Data offers you the choice of two 3G USB modems:
These modems simply connect to a USB interface on a laptop with the following specifications:
You can also connect these modems via USB cable to a suitable broadband router - such as the Billion 7404VGP-X, available from Internode.
These are 3G dual band devices, operating at both 900 MHz and 2100 MHz for extended coverage. Other common features include:
For customers requiring NodeMobile Data in areas of low 3G signal strength, we recommend the Panorama TCLIP2 3G Mobile Broadband Antenna. Detailed product information is available from the Panorama Antennas website.
The TCLIP2 connects directly to the antenna port on a Huawei E169, E160E or E1762 3G USB modem. If you are using a different type of modem, please note the antenna has a 'CRC9' connector type.
Conveniently the antenna can be either desk mounted, or clipped to your laptop. Simple to use and remarkably effective, these antennas are only $29.95 (plus $10 delivery Australia-wide).
Buy a Panorama TCLIP2 antenna from the Internode online store.
Internode also continues to support the E169 modems purchased by NodeMobile customers during the initial launch of NodeMobile Data. The E169 is no longer available - the E160E and E1762 replace the E169.
We do not provide support for any other hardware used with a NodeMobile Data service.
Note that the Huawei E220 3G modem and E960 3G router are approved for connection; however Internode does not provide support for these devices. They do not operate at the 'regional' 3G frequency of 900 MHz, and so are not recommended for customers requiring high speed regional connectivity.
However if you have such a device, and the lack of regional high speed connections is not an issue, you can simply purchase a NodeMobile USIM ($25) to enable your mobile broadband service.
iPhone tethering is not currently supported on NodeMobile Data services.