Logging into the NetComm NP805N router

Step 1

1. Ensure that your computer is connected to your NetComm NP805N.
2. Open your preferred web browser, e.g., Internet Explorer, Mozilla Firefox, etc.
3. Enter the following number into the address bar and then hit Enter on your keyboard:
   • 192.168.20.1 (this is known as an IP Address)

Figure 1: Entering the IP address to access the router

Step 2

• The modem Log In page will open. You will be prompted for a username and password.

• Click Login to log in to the router.

Configuring your Fetch TV Connection

Step 1

• Log in to the router as per the instructions above.
• Click Network Setup from the menu at the top of the screen
• Select Network Setup from the drop down menu.

Figure 2: The NetComm NP805N Network Settings Menu Option

Step 2

• The Network Settings page will be displayed.
• Scroll to the bottom of the page and ensure that Multicast is set to 'Auto'
• Tick the box next to IGMP Snooping.
• Click OK on the pop-up window to disable Stealth Mode.

Figure 3: The IGMP Snooping pop-up window

• Click Save
• A pop-up may appear advising the router now needs to restart, simply click Reboot at the bottom of the page and wait until the countdown completes.

Figure 4: The NetComm NP805N Fetch TV configuration

Congratulations! You have successfully configured the Fetch TV settings on your NetComm NP805N router.

Further Assistance

If you're looking to also set up another service on your NetComm NP805N router, please refer to our other guides:

• Initial setup for NetComm NP805N routers
• IPv6 configuration guide
• Wireless configuration guide

If you are having trouble setting up your router or would like to clarify some of the steps, please contact our Support Team.