iConnect Open 624 / 624W / 625 / 625W fetchtv Configuration

This guide is for configuring your hardware to work over an existing Internode ADSL service to access fetchtv Full. Below are instructions for configuring fetchtv to work using the Open 624 / 624W / 625 / 625W range of modem/routers.

Step 1

• Open your web browser (e.g. Internet Explorer, Mozilla Firefox or Safari if using a Mac)

• Remove everything from the address bar including the "http://" so the field is completely blank and type "192.168.1.254" and hit the enter key—you will be prompted for a username and password.

• Log in to the modem with the username root and password 0P3N

• Click the Setup link on the top of the page.

Step 2

• Click the New Connection link on the left of the page.

Step 3

• Type IPTV into the Name textbox.

• Set the Type dropdown menu to Bridge.

• Type 34 into the VCI textbox.

• Click the Apply button at the bottom-right of the page.

Step 4

• Click the Save/Restart Menu link on the left side of the page.

Step 5

• Click the Save All button to permanently save the settings to the modem.

• Click the OK button when prompted to complete the save.

• You can now plug your fetchtv set top box into any of the 4 ports on the back of the modem.

• Turn on your fetchtv set top box!