Step 1

Connect your DSL-300+ to your computer by following the instructions in the modem manual. This will involve connecting your DSL-300+ to your computers network card using the Blue ethernet cable. Turn your DSL modem on, when the status light starts flashing, reboot your computer.

Step 2

Open your web browser, and go to the URL http://192.168.0.1

A web page should load which looks similar to the image below

Step 3

Select PPPoA from the Connection Type Drop down List.

The page will momentarily refresh.

Select "VC Mux" from the "Encapsulation" drop down list.

Enter your Username in the Username field. Your username is in the form username@internode.on.net, the same as your Internode email address.

Enter your Password into the password field.

Ensure that the information is entered correctly and then click the OK Button.

Step 4

The next screen will ask if you wish to save changes and reboot the ADSL modem. Choose "Save changes to Flash now" and then click OK.

The ADSL Modem will take approximately 10-20 seconds to reboot, when the status light starts flashing you should reboot your computer.

Step 5

After rebooting your computer, your Internode ADSL connection should now be active and working. Launch your web browser and start surfing.

If you require further assistance please contact the helpdesk on 13 66 33.