These instructions are to assist customers running Windows 2000 to configure their software to connect to Internode.
When you initially signed up with Internode you will have received a sheet of information that included the information necessary for this configuration. Please have this info handy when you are configuring your software:

• Your USERNAME

• Your PASSWORD

• The correct Internode dialup TELEPHONE NUMBER for your locality
  

Please contact Technical Support (Click Here) if you have any questions.

You may need your Windows 2000 installation CD during this procedure.

Configure the Dialup Connection

1. Click on 'START Menu' | 'Settings' | 'Network and Dialup Connections'.
2. Double-click on 'Make New Connection'.
3. On the 'Welcome' screen, select 'I want to set up my Internet connection manually' and click on 'Next'.
4. Select 'I connect through a phone line and a modem' and click on 'Next'.
5. Enter the phone number for your Internode connection. Make sure that 'Use area code and dialing rules' is not selected. Numbers are listed in your startup kit. A complete list of Internode dialup numbers can also be found on our Local Connection Numbers page.

   Leave the area code field blank and put all digits in the phone number field.

   Click on 'Next'.

6. Enter your login name as it appears on your startup kit.
   Enter your password exactly as it appears in your startup kit Watch for L's that look like 1's (ones) and O's that look like 0's (zeros). Also check to be sure that you're entering capital and lower-case letters appropriately.
7. Enter 'Internode' for a connection name, and click on 'Next'.

   Next, you will be asked if you want to continue setting up an Internet Mail account. If you have no preference in web browsers, we recommend that you select 'Yes', and click on 'Next' to continue setup of the MS Internet Explorer and Outlook Express.

8. Make sure to select the box for 'To connect to the Internet immediately...' and click on 'Finish'.
9. Make sure that your Internode username is listed correctly. Enter your password, and make sure you remove anything that appears in that field before typing your own password. You may select the ' Save Password ' field, which may allow you to connect to Internode in the future without having to re-enter your password.

   Click on 'Connect'.

You have now configured Windows2000 Dial-up Networking to connect to Internode.

For other features and functions, consult your Windows2000 Manual or contact Microsoft Technical Support online at: http://www.microsoft.com/Support/